Together for Good
Skip to main content area Skip to main navigation Skip to institutional navigation Skip to footer

School of Science & Engineering

MS in Engineering Course Descriptions

First-level Graduate Courses

CEN 5012 Steel Analysis and Design
This is an introductory course in the design and analysis of steel structures based upon specifications published by the American Institute of Steel Construction (AISC). The objective of this course is to introduce students to the structural design process and to provide a detailed understanding of the design of steel structures. The course will emphasize the general theory and behavior of structural steel, as well as design practice.

CEN 5016 Concrete Analysis and Design
This is an introductory course in the design and analysis of reinforced concrete structures. An introduction to the ACI-318 building code is given in the context of the course to familiarize students with the main design document in the country. The objective of this course is to introduce students to the structural design process and to provide a detailed understanding of the design of reinforced concrete structures. The course will emphasize the general theory and behavior of reinforced concrete, as well as design practice.

CEN 5020 Geotechnical Design
An introduction to the geotechnical design aspects of foundations. Site investigation techniques and characterization of subsurface conditions. Analysis of lateral earth pressures. Geotechnical design of shallow and deep foundations with emphasis on capacity and movement under vertical and lateral loading.

CEN 5022 Earth Retaining Structures
An examination of the geotechnical design aspects of earth retaining structures. Lateral earth pressure and slope stability analyses related to excavations and retaining structures. Analysis and design of retaining walls, sheet-pile walls, and braced and unbraced excavations. Case studies and design problems.

CEN 5030 Environmental Design
This course is structured to emphasize the design method. Design projects are taken from the areas of water and wastewater treatment, solid waste disposal, air pollution control, hydraulics and applied hydrology. Assignments are intended to bring together much of the material covered in previous courses. Oral and written reports, design specifications and preliminary drawings are required for all assignments.

CEN 5032 Applied Hydrology
This course begins with an introduction to hydrologic principles followed by applications to rainfall-runoff analysis, floodplain hydraulics and groundwater hydrology. A strong emphasis is placed on computational methods and computer programs are used for problem solving.

CEN 5042 Traffic Engineering
Development and applications of concepts of geometric design for rural and urban highways. Design controls and criteria; elements of design, including sight distance, horizontal and vertical alignment; cross-section elements; high-way types; intersection design elements; types of interchanges and interchange design elements; grade separations and clearance; development of visual elements.

CEN 5050 Construction Planning and Management
Construction management process and methods; estimating construction cost and bidding, construction activity planning and scheduling, project planning; project cost and cost control; construction organization costs control; computerized project scheduling.

EEN 5145 Discrete Time Signals and Systems
This course parallels a student’s understanding of continuous time signals and systemswith a complete treatment of discrete time signals and systems with applications. Itintroduces the sampling process and develop discrete time signal and systemrepresentation and analysis in both time and frequency domains. The Z-Transform will bedeveloped to ease difference equation analysis analogous to the continuous time Laplacetransform. Digital Filtering, including both Finite Impulse Response (FIR) and InfiniteImpulse Response (IIR) will be used to apply methods.

EEN 5175 Digital Architecture
This advanced elective will introduce students to the Verilog Hardward DescriptionLanguage as we apply common digital architectures to a range of high level functional design problems. Using lab and project based teaching, we will write behavioral descriptions and synthesize hardware in the form of field programmable gate arrays.

EEN 5265 Engineering Management
An introductory course in the management of technology-based companies combining reading, lecture, case study and project teaching methods. The course presents introductory material from the areas of accounting and financial principles, R&D management, project development, management practices and human factors. Language and effective communication principles will be a recurring theme throughout the course.

EEN 5270 Energy, Generation, Conservation and Technology
This course provides an overview of generation, transmission and distribution of U.S. electrical power systems. While standard fossil fuel generation (oil, gas, nuclear) is covered, a significant portion of the course is devoted to Energy Efficiency and renewable energy (EERE) topics, including wind, hydro and solar. The importance of EERE in light of present environmental, economic and ethical considerations is covered. Cogeneration is covered, and compared to RE technologies in light of ROI. Energy measurement and smart grid technology are discussed. A significant project involving real-world EERE is required and is a significant portion of the course.

MEN 5010 Advanced Mechanics/FEM
This course on the mechanics of solids covers the mathematical basis for stress analysis, models of material behavior, the finite element method and its application, and boundary and initial value problems involving deformable solids.

MEN 5012 Instrumentation/Robotics
This course provides an introduction to the kinematics, statics, dynamics, and control issues involved in the instrumentation and design of robotic systems. Intended as an interdisciplinary course, students will interact with computer science, electrical engineer, and mechanical engineering majors to create and analyze a robotic system.

MEN 5020 Advanced Materials
The relation between structure and the mechanical behavior of polymeric materials, including the application of fracture mechanics concepts to failure mechanisms such as wear, fatigue, and environmental degradation.

MEN 5030 Energy Systems
This course provides an introduction to global energy concerns, fossil and nuclear fuels, energy consumption analysis, energy management and conservation techniques, renewable and alternative energy sources. In addition, the course covers traditional Rankin cycles from traditional power plants multi-stage absorption cycles and vapor compression cycles with pure and mixed working fluids. 

MEN 5040 Advanced Fluid Mechanics
This course covers the compressible flow including shock waves, boundary layers, separation, drag, and lift. Course also covers inviscid, irrotational flow, and boundary layer theory. Analytical and numerical solutions for flow over plates are discussed.

Graduate-only Courses

GEN 5001 Introduction to Systems Engineering
Systems Engineering provides an interdisciplinary approach to designing successful systems. It focuses on defining customer needs and required functionality early in the development cycle, documenting requirements, then proceeding with design synthesis and system validation while considering the complete problem including operations, performance, test, manufacturing, cost, and schedule. This subject emphasizes the links of systems engineering to fundamentals of decision theory, statistics, and optimization. It also introduces the most current, commercially successful techniques for systems engineering.

GEN 5002 Numerical Methods
This course will cover modern computational methods used for the solution of engineering problems. We will consider the application of each method to engineering design and optimization. Topics include curve fitting, optimization, numerical solution of systems of equations, numerical integration and differentiation. Students will learn to implement these algorithms in Octave (which has a very similar syntax to Matlab).

GEN 6001 Finite Elements
In industry, engineers rely on finite element methods to solve the complex differential equations obtained during modeling of stresses, fluid flow, and heat transfer in structures. Students will be introduced to the theory of finite element methods and the implementation of these methods using ANSYS.

GEN 6004 Engineering Project Management
Studies the principles, theory, and practice of engineering management, including the management of human resources, entrepreneurial skills, decision making, and mathematical and scientific methods. The use of computer software for project scheduling and resource allocation is required.

GEN 6010 Earthquake Engineering
This course is an introduction to earthquake engineering. Topics in this course include: plate tectonics and seismology; rupture mechanism; measures of magnitude and intensity; probabilistic seismic hazard analysis; Strong earthquake ground motion; site effects on ground motion; soil-structure interaction; dynamic analysis of structures; response spectra; modal analysis; nonlinear time-history analysis; earthquake resistant design; and Seismic detailing.

GEN 6012 Prestressed Concrete Structures
This course covers the analysis and design of prestressed concrete structures. Topics in this course include: time-dependent properties of concrete and reinforcing material; concept and application of prestressed concrete; service and ultimate limit state analysis and design of prestressed concrete structures and components; detailing of components; calculation of deflection; and prestress losses.

GEN 6014 Advanced Structural Analysis
The course emphasizes the principles behind modern nonlinear structural analysis software. This course covers the theory, computer implementation, and applications of methods of material and geometric nonlinear analysis. Emphasis is on modeling of 2D and 3D frame structures using beam-column elements.

GEN 6020 Principles & Applications of Geographic Information Systems
This course introduces students to the use and potential of Geographic Information Systems in their discipline. Topics include the general concepts of GIS use and introduce the material in the exercises that demonstrate the practical application of GIS.

GEN 6030 Urban Hydrology & Storm Water Management
This course reviews the basic concepts of rainfall and runoff and then applies these to complex urban systems of drainage, stream and river hydraulics and flood prevention. The application of best management practices to control storm water from developed areas is presented within the constraints of current laws and regulations. Current computer software used for project evaluations will be presented and available for use in coursework.

GEN 6032 Sustainable Infrastructure Systems
An evaluation of new or renewed infrastructure systems with respect to sustainability benefits. A comparison of alternatives along with evaluation of long term effects throughout the life cycle of a project will be emphasized. Various ratings systems for the evaluation of green practices required to enhance the economic, environmental and social aspects of infrastructure systems are investigated.

GEN 6999 Special Topics or Directed Study

Management Electives

GMGT 5100 Management Planning & Control

GMGT 5120 World Class Operations & Supply Chain Management (2-credit)

GMGT 5140 Effective Managerial Communication (2-credit)

GMGT 5160 Marketing Analysis and Decision Making

GMGT 5920 Leading Effective Teams (2-credit)